|
|
Oh dear
(Preview)
Took my conny to a mates garage to use his pit so i could weld a bit on the inner sill but on closer inspection the old thing needs a fair bit more work than i had bargained for, one side really needs a new inner sill and the other needs a bit of work so its probably gonna be easier to just change both inner and out...
|
chucky
|
3
|
288
|
|
|
|
|
|
cutting it a bit fine now
(Preview)
Berta went for MOT today, failed on a few little bits one of which was handbrake was to the limit had no play, tried to tighten it a bit and left hand side snapped. I now have a big job on me hands as I've never had to deal with handbrake cables before. Will be at Manningtree even if I have to put her on a trailer l...
|
AnitaF
|
12
|
347
|
|
|
|
|
|
Probably a question for mike an fi but someone else might know...
(Preview)
My Hillman Husky....ok bear with me here. Bought a pair of 1.25" wheel spacers for the rear wheels to make it look a little less "nipped" an fill the arches. I had to get Mini spacers to go with the correct PCD but the extended studs have q too small thread (bore) to screw on my current s...
|
stevie
|
11
|
402
|
|
|
|
|
|
White wall tyres
(Preview)
[IMG]https://i61.photobucket.com/albums/h45/hotrodmitch/Image...
|
Mitch
|
13
|
485
|
|
|
|
|
|
SOS
(Preview)
I have a bit of a problem, Berta is booked in for MOT tomorrow at 11:15 and I've just found out that the cap on me washer bottle is knackered, has anyone got one I could beg, steal, borrow or buy, would be a great help. -- Edited by AnitaF on Tuesday 21st of April 2009 09:11:39 PM
|
AnitaF
|
2
|
253
|
|
|
|
|
|
opinions please guys
(Preview)
want to lower the front of the husky a bit. do i cut a coil off the front springs or get coil clamps? worries me a bit cuttin em cos i wont be able to return it back to standard too easily, but at the same time i dont know much about coil spring clamps safety-wise.
|
stevie
|
6
|
307
|
|
|
|
|
|
berta welding
(Preview)
I'd like to say a huge thankyou to chucky for doing the welding on Berta, you've helped me to get one step closer to manningtree, just MOT left to do and we are away.
|
AnitaF
|
3
|
341
|
|
|
|
|
|
Satin cars
(Preview)
Not black, but still satin paint Rotten Pop, sorry just had t...
|
giggles
|
17
|
430
|
|
|
|
|
|
Engine swap
(Preview)
I know a few people on here are into Humbers, Hillmans etc. Would a Minx/Humber/Singer 1725cc engine and box be an easy swap into a 1958 Husky? Then i suppose it would be a case of finding what suspension/brakes etc will fit. Its all pie in the sky at the mo but a bit more power over the 1390 would be nice. By t...
|
stevie
|
11
|
292
|
|
|
|
|
|
valve radio
(Preview)
the old radio in the buick doesn't work. has anybody got any idea where i can get it looked at?
|
wrecker
|
2
|
221
|
|
|
|
|
|
What are the rods on the corner of the front bumpers for.?
(Preview)
ive seen on alot of old yank clasics have rods on the o/s/f and n/s/f corners of the front bumpers pointing to the floor. what are they for and what do they do?
|
Cudley
|
10
|
388
|
|
|
|
|
|
Rover V8
(Preview)
For a long term project/idea I`m looking at the Rover V8 with Auto I know nothing about them apart the usual cars n vans that they can be found in.I reckon I"ll buy a complete running car so I`ve got everything I"ll need and part out the rest. So,the question is " Which is the best to go for &...
|
Chevy
|
14
|
362
|
|
|
|
|
|
Help needed for Ipswich school prom
(Preview)
Hi all Don't know if you can help with this one. A guy from your neck of the woods got in touch with me... HelloMy daughter is going to her school prom in June and wants to arrive in something different - doesn't want to go in a limo cause every one else will.What we would like is a custom car/ hot rod to take my d...
|
66chev
|
2
|
236
|
|
|
|
|
|
Poorly Berta Beetle-need help welding
(Preview)
Having found more probs yesterday it now looks like I aint gonna make Southend. I have a slight problem with the frame head it needs a bit of welding doing to it and I don't know anyone that can weld, so if you guys know of anyone either in or near Ipswich I would be most grateful. I'll even sport em a few beers...
|
AnitaF
|
20
|
440
|
|
|
|
|
|
what is it about satin black?
(Preview)
what is it about satin black ?id like to know the reason for satin black on custom cars.my prefrance is metalics genraly dark.
|
Cudley
|
17
|
415
|
|
|
|
|
|
Made a list of what I think needs doing to the A40 !
(Preview)
LOV897F Restoration Proceedure Interior Work Inc Electrics To Be Completed : Headlining to be replaced with new liningFloor to be checked for corrosion/repaired and undersealedSeats to be recovered using reproduction leather to original styleCarpet to be replaced front to back using reprodu...
|
Austincrazy
|
12
|
351
|
|
|
|
|
|
One for toe-knee
(Preview)
while browsing por....errr...the net i found this consul gasser. You probly all seen it before but i fink it looks the nuts.
|
stevie
|
3
|
306
|
|
|
|
|
|
The wife's new car
(Preview)
Just been to get a new car for Sarah. wanted something to replace her renault Scenic. Now need to decide whether to fit revolutions or moon discs. Will be satin blacked by the summer. [IMG]https://i61.photobucket...
|
Mitch
|
19
|
493
|
|
|
|
|
|
SVA CHANGES TO IVA
(Preview)
http://www.ampar.com/pdfs/SVA%20to%20IVA%20leaflet.pdf
|
ANIMAL
|
0
|
184
|
|
|
|
|
|
Why is everyfing i want so far away???
(Preview)
http://cgi.ebay.co.uk/VW-Beetle-Buggy-Sand-rail-Volksrod-Wheels-and-tyres_W0QQitemZ170308908169QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item170308908169&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318
|
stevie
|
15
|
385
|
|
|
|
|
|
Leccy fan
(Preview)
I want to fit an electric fan to my consul as the one on there is a bit small and isnt to good when sitting in traffic on a warm day. Now, am i right in thinking that if i fit a front mounted fan it needs to be a blower (pusher)?
|
chucky
|
2
|
235
|
|
|
|
|
|
Drum brakes
(Preview)
Been moanin about me wheels for ages now and had another idea. Is there a company round these parts that would re-drill a different stud pattern in the rear drums? Just a fort!!!
|
stevie
|
0
|
195
|
|
|
|
|
|
Rover V8 into Velox E!! (hee hee!!)
(Preview)
Hi All Does anybody know of or can recommend someone who can take on the task of breathing new life into my bruvs `56 Velox. He has got a Rover 3.9 engine and autobox from an ex-military ambulance, and wants to get it shoehorned into a bog standard `56 Velox. He dosnt mind if the column change is lost, just w...
|
psychosceptre
|
9
|
347
|
|
|
|
|
|
the right sound
(Preview)
i want to alter the exhaust on the truck(for more noise) and was wondering if i should go for changing the silencers for some cherry bombs or just take away the silencers and just have it straight through Whats the thoughts of you peeps
|
ANIMAL
|
10
|
366
|
|
|
|
|
|
my bike
(Preview)
i am thinking about re-painting my vespa any suggestions
|
problem child
|
5
|
297
|
|
|
|
|
|
Me bike
(Preview)
[IMG]https://i61.photobucket.com/albums/h45/hotrod...
|
Mitch
|
46
|
914
|
|
|
|
|
|
Fukstix
(Preview)
Took the little round lights off Bucks rear arches this mornin and ive got just the very back square lights now. Looks great but with every plus theres a minus. Me front n/s indicator has stopped workin ive tried changin bulbs with the o/s an the bulb works fine. WTF???? If its dry tomorrow ill invest...
|
stevie
|
3
|
288
|
|
|
|
|
|
Opinions pleeeeeeze
(Preview)
Now that my bug truck has been modded to look a little more...err....."trucky" (is that a word)? im debating whether or not to use the baja rear cage. Apparently i have to use it for legal purposes but does it look better wiv or wivout? Bear in mind i can paint it black to lose it a bit.
|
stevie
|
19
|
418
|
|
|
|
|
|
My brakes locked up
(Preview)
Just a quick question! I took the Hillman minx out for a drive today as its been sitting on the drive for a few weeks. And I didn't get far when the car started slowing down so I pulled over and the brakes locked up the pedal was really stiff so I checked there was plenty of brake fluid.. pumped it a few tim...
|
Matt
|
4
|
281
|
|
|
|
|
|
dannys chevy parts
(Preview)
has anyone had dealings with dannys chevy parts only i'm told he is resonably local but i cannot seem to get the web site up to find out how local he is and what sort of stock he holds
|
ANIMAL
|
13
|
922
|
|
|
