got it home ok! a few niggly problems to sort, lack of brake lights, needs a new battery and I need a new indicator stalk and a drivers window winder. providing the weather is a little better tomorrow I'll see if I can find any other hidden horrors! :S
got things to sort before I take it anywhere, need an indicator switch, and need to sort out why the brake lights aren't currently working.
have ordered a new battery and some paint to tart her up a bit.
anyone know if you can get metalflake paint in a spray can? Wanted a metalflake red for the roof.
You can get metalflake in a can but it isnt as good as the proper stuff and is probably expensive. get yourself a litre of ready mixed red metalflake in lacquer off ebay and i'll give you a hand to spray it thru a compressor up my lock up
thats rediculously close to the truth. The spot lights go back to nowhere. There are numerous live wires not terminated or insulated, the flasher relay was just tucked up in the dash and some wires seem to worryingly bypass the fuse box.
I've simplified lots of it, so now I'm hoping at the weekend I can get the essentials working and go for a little drive around without fear of catching fire.
RESULT!!!!! Indicators now working, brake lights working when wires are shorted but not working from the pressure switch :( , was in a hurry, maybe i've connected them wrong. will look tomorrow!
wiring tip...dont wire stuf up all the same colour wire ,big mistake lol lol.now how'd i know that lol. oh well some times needs must, and when you just wona get your car out on the road we do what we must at the time.
__________________
Cars don't get old, they get a v8. Its not how it looks,it's how YOU see it that counts.
Thanks :) . just need to order a stop lamp pressure switch now and I should be all set-ish (do you need full beam for MOT on a 63 car). anyway at least it'll be driveable on the remaining MOT if not.
Then I need to find an undercover space somewhere close-ish to Ipswich / Woodbridge to spray her up . Possibly order some Bullet Mirrors and Lower her a bit then I'm ready to join in some of the fun.
DOH!! wrong thread on the switch :( , however on putting the old one back in, it now appears to work. Maybe my accidentally dropping it on the floor did it some good, ha ha . think I better order another though as this one is obviously faulty.
B*stard f*cking car had it starting well every time so I gets my insurance sorted, hop in turn the key and Clunk! The starter Solenoid clunks, but the starter motor does not engage at all, not even a whirr. Bad earth, faulty solenoid or knackered starter motor, B*llocks. I was intending to go for a drive this weekend.
Have tested the starter motor, it seems ok. Have put new earth straps on and cleaned all the contacts new solenoid should be on it's way ,turns out the old one had a barely visible crack right through the case, that cant have been helping matters!
Wish me luck chaps! glad the nights are lighter now, I will be able to get much more work done!
Cheers Cudley , will do. Will look for a manual/guide on the type of solex carb I have and see how I get on. was running fine a couple of weeks back, so somethings not right in there.
got it working, think the float was stuck having not been started for a while. just waiting for it to fully cool down so I can start again and make sure it wasn't a fluke.
just been for a spin , sketchy as hell juggling choke and throttle, it definately needs adjustment, but at least it's running